« previous next »
Pages: [1]   Go Down

Author Topic: Blank Board Serializer!  (Read 18757 times)

0 Members and 1 Guest are viewing this topic.

Offline Machead

  • Technicians
  • The Quiet Type
  • *
  • Posts: 78
  • Gender: Male
    • EveryMac.com
  • Speciality: Specialised Guinness Taster
Blank Board Serializer!
« on: July 29, 2009, 11:17:53 PM »
Unlikely that anyone has a copy of this little utility, but you never know!
We have a white MacBook here that had it's logic board replaced last year.  It's being issued to a new teacher in Sept, so while I was wiping the HDD and reinstalling the system, I noticed the serial no. was missing from the system profile.  Apparently this often happens, the tech is meant to flash the machine's serial to new board, but forgets to do so.  So do any of you have a copy of Apple's 'Blank Board Serializer' that I could beg, borrow, steal or even buy?
Cheers.   
« Last Edit: July 29, 2009, 11:19:39 PM by Machead »
Logged
He who talks by the yard & thinks by the inch, usually gets kicked by the foot.

Offline dfinney

  • Technicians
  • Board Veteran
  • *****
  • Posts: 1906
  • Gender: Male
    • Wallace high school
Re: Blank Board Serializer!
« Reply #1 on: July 30, 2009, 09:34:29 AM »
MacHead your best bet is to bring it back to were you got it done as only ASP people have the software for this or just search the torrent sites.

Try http://thepiratebay.org as i know they do the ASD disk from apple i downloaded it to do a thermal calibration on my G5 as it kept no responding every couple of hours.
Logged
"Education is a progressive discovery of our own ignorance."

Offline Machead

  • Technicians
  • The Quiet Type
  • *
  • Posts: 78
  • Gender: Male
    • EveryMac.com
  • Speciality: Specialised Guinness Taster
Re: Blank Board Serializer!
« Reply #2 on: July 31, 2009, 05:58:14 PM »
Thanks dfinney,

nothing on pirate bay, guess I'll have to try one of the torrent sites.
Logged
He who talks by the yard & thinks by the inch, usually gets kicked by the foot.

Offline dfinney

  • Technicians
  • Board Veteran
  • *****
  • Posts: 1906
  • Gender: Male
    • Wallace high school
Re: Blank Board Serializer!
« Reply #3 on: August 03, 2009, 09:04:10 AM »
I checked with the other tech here on friday as he had his logic board replaced a couple of months ago and he has no serial number assigned either.

MAC SYS done his.
Logged
"Education is a progressive discovery of our own ignorance."

Offline Machead

  • Technicians
  • The Quiet Type
  • *
  • Posts: 78
  • Gender: Male
    • EveryMac.com
  • Speciality: Specialised Guinness Taster
Re: Blank Board Serializer!
« Reply #4 on: August 07, 2009, 02:14:24 PM »
Yep, ours was done by MacSys also.  I emailed them and they said if I bring it in to them they can do it in a few minutes.  I would like to have done it myself though.  No plans to in Belfast area in the near future, but if all else fails I suppose we'll bring it up there.  Though having said that, it's not exactly a 'life essential' to have the serial No. in the system profiler.
Logged
He who talks by the yard & thinks by the inch, usually gets kicked by the foot.

Offline Machead

  • Technicians
  • The Quiet Type
  • *
  • Posts: 78
  • Gender: Male
    • EveryMac.com
  • Speciality: Specialised Guinness Taster
Re: Blank Board Serializer!
« Reply #5 on: August 10, 2009, 12:53:30 PM »
Well after numerous attempts I got a working copy of the utility in question.
It does only take a minute or two!  The machine boots up in what looks a lot like 'classic mode'.  There's a dialog box with a field to enter data, a proceed button, followed by another dialog box with the serial No. and a 'confirm' or 'back' button and thats it.  The copy I got originally came from someone (in the US I think) who got their laptop returned with the service disc still in the optical drive!  Bet the Tech's at that service centre got a bollicking over that one!
Logged
He who talks by the yard & thinks by the inch, usually gets kicked by the foot.

Offline dr.b

  • Newbie
  • *
  • Posts: 1
Re: Blank Board Serializer!
« Reply #6 on: May 10, 2012, 06:03:53 AM »
Do you still have the Serializer tool.  I had to recently replace my logic board in my MacBook Pro (Nvidia GPU) version and I would like to put the serial number on the new board.  Thanks for your time.
Logged
Pages: [1]   Go Up
« previous next »