C2k Help
Non-C2k Issues => Legacy Networks => Topic started by: Paul on March 11, 2011, 03:14:27 PM
-
what monitoring software do you use on your legacy?
or mayb u dont.
-
Were looking at this, http://italc.sourceforge.net/home.php
At the minute we use nothing.
-
thats what we use here the italc software spot on for being free only issue is different teachers using different computers having to readd all the stations again but other than that its fine
-
do u need to install it on the client machines?
-
Yes it has a client install which i installed manually on each machine but was very easy to get setup as long as you keep the teacher key.
-
cant get to install right any install instructions?
-
you install on the teachers computer first that then creates a master key so put it in a share somewere on your network. Then installed again on each client but this time dont select master select client install it will then ask for the location of the master key (Teachers computer for that room) point it to the location of the key and that should be it.
Only run 1 master key per room so use the teachers computer as the master then all over computers are used as client's
-
I have 3 rooms setup running it and it worked first time as long as i remember to save the key somewere on the server in seperate folders which ive named by room number. so for instance room 327 only the teachers computer can see all computers in that room and room 329 only teachers computer can see the computers there 329 cant see 327 and vice versa.
If you have tried installing the master to all machines it wont work right the master must be the machine that you want to be able to view all other computers from and then the clients must have the client install with the right master key associated to them
-
i have been using the italc to. once you get it set up for one user you can copy the config files over to each users local "local settings" to save you manually adding every machine for each teacher that uses it
-
Hi gerard that would be great if i was able to do that how were you able to do it? it would save so much time to be honest
-
CANT GET it to accept the key, the next button is greyed out.
-
not sure to be honest when i was installing the software i didnt have any problems under admin account as long as the master key was not in my documents but somewere on the main server.
have you tried it on another workstation just incase its a problem with that station?
-
i had problems with the key too, i had to copy and paste it manually from the server to the italc folder in program files
i cant remember the location but ill have a look tomorro aaron and let you know
-
Great thanks Gerard its been an issue just with different teachers going on the computer having to add the stations in agian but would be alot easier just to add what ever config file i need in
-
i Think this is how its done, (its been a while)
* log on to the master machine as teacher no 1, add all machines in that room, log off
*log on as admin copy italc folder from copy teacher1 application folder ( in my case its \\servername\profiles\teacher1\application data\ )
and paste it in to the same folder for teacher2
* you may need teacher 2 to log on and run italc for their first time before pasting the above folder in as it may get over written
-
global config.xml
personalconfig.xml are the files you need
-
is it possible to install this on the local admin of each machine?
also it doesnt seem to recognise the mac address when i enter it.
-
thats great cheers gerard ill take a copy of those and add them to the other users thank you.
I was able to search for my not by mac address but by IP address or each machine or there station number depnding on your DNS server as long as its resolving the address ok